Description: Paper at Top Tray Exit Sensor Control logic reports paper at the Top Tray Exit Sensor.
Remedy: • Check paper on the Top Tray Exit Sensor. • Check for obstructions in the paper path. Enter Service Diagnostics Menu: Printer Menu > Troubleshooting > Service Tools > Printer Status Page > hold the Up and Down buttons simultaneously > Run Service Diagnostics > OK. Actuate the Top Tray Exit Sensor (PL 21.11). The display changes. Y↓N→Check the circuit of the Top Tray Exit Sensor. Refer to Transmissive Sensor Procedure for troubleshooting procedure. Check the following: • Ensure that the connectors shown in the circuit diagrams are securely connected and that the wires are not damaged • Exit Motor Belt for wear or damage • Exit Drive Shaft Rolls for wear or damage • Exit Pinch Rollers for wear or damage • Synchronous Belt for wear or damage If the above checks are OK, then replace the Top Tray Exit Sensor (PL 21.11). If the problem continues, replace the Finisher PWB (PL 21.12).