Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 012-910 — Xerox Phaser 7760

Code: 012-910

Description: Staple Ready Sensor Fail Staple Ready Sensor is turned Off at stapling start.
Remedy: Enter Service Diagnostics Menu: Printer Menu > Troubleshooting > Service Tools > Printer Status Page > hold the Up and Down buttons simultaneously > Run Service Diagnostics > OK. Block/unblock the Stapler Ready Sensor (PL 21.6). The display changed. Y↓N→Check continuity between the Stapler Ready Sensor and Finisher PWB. The continuity check is OK. Y↓N→Repair the open circuit or short circuit. Replace the Stapler Ready Sensor (PL 21.6). If the problem continues, replace the Finisher PWB (PL 21.12). Check the following: • Wiring between the Staple Ready Sensor and the Finisher PWB • Wiring between the Staple Motor and the Finisher PWB • Obstructions on the Stapler Upper Rail • Stapler Move Motor Gear If the above checks are OK. replace the Finisher PWB (PL 21.12).

← Xem tất cả mã lỗi Xerox Phaser 7760

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie