Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 012-945 — Xerox Phaser 7760

Code: 012-945

Description: Low Staples The Low Staple Sensor turned ON just before the Staple Motor started running.
Remedy: • Check the Stapler Head connectors for connection failure. • Check the staple remaining amount.
Enter Service Diagnostics Menu: Printer Menu > Troubleshooting > Service Tools > Printer Status Page > hold the Up and Down buttons simultaneously > Run Service Diagnostics > OK. Actuate the Low Staple Sensor (PL 21.6). ‘LOW’ (staples available) is displayed. Y↓N→Check continuity between the Stapler Head and Finisher PWB. The continuity check is OK. Y↓N→Repair the open circuit or short circuit. Replace the Stapler Head (PL 21.6). If the problem continues, replace the Finisher PWB (PL 21.12). If the problem continues, replace the Finisher PWB (PL 21.12).

← Xem tất cả mã lỗi Xerox Phaser 7760

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie