Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 012-946 — Xerox Phaser 7760

Code: 012-946

Description: Top Tray Full The Top Tray Full Sensor was turned On for 10 seconds continuously.
Remedy: • Check the Top Tray Full Sensor for improper installation. • Check the Top Tray Full Sensor connectors for connection failure. • Check the Top Tray Full Sensor Actuator for deformation and operation failure.
Enter Service Diagnostics Menu: Printer Menu > Troubleshooting > Service Tools > Printer Status Page > hold the Up and Down buttons simultaneously > Run Service Diagnostics > OK. Actuate the Top Tray Full Sensor. (PL 21.11) The display changes. Y↓N→Check continuity between the Top Tray Full Sensor and Finisher PWB. The continuity check is OK. Y↓N→Repair the open circuit or short circuit. Replace the Top Tray Full Sensor (PL 21.11). If the problem continues, replace the Finisher PWB (PL 21.12). If the problem continues, replace the Finisher PWB (PL 21.12).

← Xem tất cả mã lỗi Xerox Phaser 7760

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie