Description: Puncher Waste Bin Nearly Full Cumulative punching count reached the specified times (2-hole punching: 5000 times, 4-hole punching: 2500 times). This procedure can be used for troubleshooting Chain Link code 012- 948, 015-400, or 112-700.
Remedy: Remove the Puncher Waste Bin and discard its dust. Install the Puncher Waste Bin. The problem resolved. Y↓N→Enter Service Diagnostics Menu: Printer Menu > Troubleshooting > Service Tools > Printer Status Page > hold the Up and Down buttons simultaneously > Run Service Diagnostics > OK. Run the Puncher Box Set Sensor test. Remove and insert the Puncher Waste Bin. The display changes. Y↓N→Check continuity between the Puncher Box Set Sensor and Finisher Main PWB. The continuity check is OK. Y↓N→Repair the open circuit or short circuit. Replace the Puncher Box Set Sensor (PL 21.5). If the problem continues, replace the Finisher PWB (PL 21.12). Replace the Finisher PWB (PL 21.12). Ensure the Puncher Waste Bin is installed properly.