Code: 012-949
Description: Puncher Waste Bin Open/Reseat Punch Box The Puncher Waste Bin Set Sensor detected Off (No Puncher Waste Bin).
Remedy: • Check the Puncher Waste Bin Set Sensor for improper installation. • Check the Puncher Waste Bin Set Sensor connectors for connection failure. • Check the Puncher Waste Bin Actuator part for deformation and damage. • Check the Guide for deformation. • Check the Guide for a foreign substance.
Enter Service Diagnostics Menu: Printer Menu > Troubleshooting > Service Tools > Printer Status Page > hold the Up and Down buttons simultaneously > Run Service Diagnostics > OK. Actuate the Puncher Box Set Sensor (PL 21.5). Remove and insert the Puncher Waste Bin manually. The display changes. Y↓N→Check continuity between the Puncher Box Set Sensor and Finisher Main PWB. The continuity check is OK. Y↓N→Repair the open circuit or short circuit. Replace the Puncher Box Set Sensor (PL 21.5). If the problem continues, replace the Finisher PWB (PL 21.12). Check the Puncher Waste Box Actuator and Guide for deformation. The Puncher Waste Bin can be removed and inserted properly. Y↓N→Repair or replace the Puncher Waste Bin (PL 21.5). If the problem continues, replace the Finisher PWB (PL 21.12).
Enter Service Diagnostics Menu: Printer Menu > Troubleshooting > Service Tools > Printer Status Page > hold the Up and Down buttons simultaneously > Run Service Diagnostics > OK. Actuate the Puncher Box Set Sensor (PL 21.5). Remove and insert the Puncher Waste Bin manually. The display changes. Y↓N→Check continuity between the Puncher Box Set Sensor and Finisher Main PWB. The continuity check is OK. Y↓N→Repair the open circuit or short circuit. Replace the Puncher Box Set Sensor (PL 21.5). If the problem continues, replace the Finisher PWB (PL 21.12). Check the Puncher Waste Box Actuator and Guide for deformation. The Puncher Waste Bin can be removed and inserted properly. Y↓N→Repair or replace the Puncher Waste Bin (PL 21.5). If the problem continues, replace the Finisher PWB (PL 21.12).