Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 012-984 — Xerox Phaser 7760

Code: 012-984

Description: Booklet Low Staple F Booklet Stapler Low Staple Front signal was detected just before Stapling operation. Booklet Stapler Low Staple Front signal was detected at Power On, at initialization, or when the interlock was closed.
Remedy: Supply the staples. The problem is resolved. Y↓N→Enter Service Diagnostics Menu: Printer Menu > Troubleshooting > Service Tools > Printer Status Page > hold the Up and Down buttons simultaneously > Run Service Diagnostics > OK. Actuate the Booklet Stapler Low Staple Front. ‘LOW’ (staples available) is displayed. Y↓N→Check continuity between the Staple and Booklet PWB, and between the Booklet PWB and Finisher PWB. The continuity check is OK. Y↓N→Repair the open circuit or short circuit. Replace the Booklet Stapler Low Staple Front (PL 21.16). If the problem continues, replace the Finisher PWB (PL 21.12). Replace the Finisher PWB (PL 21.12). If the problem continues, replace the Booklet PWB (PL 21.12). If the problem continues, replace the Finisher PWB (PL 21.12). If the problem persists, replace the Booklet PWB (PL 21.12).

← Xem tất cả mã lỗi Xerox Phaser 7760

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie