Description: Finisher Stacker Tray Lower Safety Warning The machine has detected a fault with the Sensor that detects vertical motion of the Finisher Tray.
Remedy: Check for obstacles in the under Stacker Tray Bracket. The problem is resolved. Y↓N→Enter Service Diagnostics Menu: Printer Menu > Troubleshooting > Service Tools > Printer Status Page > hold the Up and Down buttons simultaneously > Run Service Diagnostics > OK. Move the Stacker Tray manually. The display changes. Y↓N→Check conductivity between the Stacker Safety Switch and Finisher PWB. The conducting check is OK. Y↓N→Repair the open circuit or short circuit. Check the operation and conductivity of the Stacker Safety Switch contact points. The contact points are operating and conducting properly. Y↓N→Replace the Stacker Safety Switch. Replace the Finisher PWB (PL 21.12). Replace the Finisher PWB (PL 21.12). If the problem continues, replace the Finisher PWB (PL 21.12).