Description: Booklet Low Staple R Booklet Stapler Low Staple Rear signal was detected just before Stapling operation. Booklet Stapler Low Staple Rear signal was detected at power On, at initialization, or when the Interlock was closed.
Remedy: Supply the staples. The problem is resolved. Y↓N→Enter Service Diagnostics Menu: Printer Menu > Troubleshooting > Service Tools > Printer Status Page > hold the Up and Down buttons simultaneously > Run Service Diagnostics > OK. Actuate the Booklet Stapler Low Staple Rear. ‘LOW’ (staples available) is displayed. Y↓N→Check continuity between the Staple and Booklet PWB, and between the Booklet PWB and Finisher PWB. The continuity check is OK. Y↓N→Repair the open circuit or short circuit. Replace the Booklet Stapler Low Staple Rear (PL 21.16). If the problem continues, replace the Finisher PWB (PL 21.12). Replace the Finisher PWB (PL 21.12). If the problem continues, replace the Booklet PWB (PL 21.12). If the problem continues, replace the Finisher PWB (PL 21.12). If the problem continues, replace the Booklet PWB (PL 21.12).