Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi OF 99-3 — Xerox Phaser 7760

Code: OF 99-3

Description: Switch
Remedy: Actuate the Switch. The display changed. Y↓N→There is +3.5/+5 VDC measured between Pin 2(+) of the Switch and GND(-). Y↓N→Check the wire between the switch Pin 2 and the PWB Pin 3 for an open circuit and poor contact. If the check is OK, replace the PWB. There is +3.5/5 VDC measured between Pin 1(+) of the Switch and GND(-). Y↓N→Replace the Switch. Check the wire between the PWB Pin 4 and the switch Pin 1 for an open circuit and poor contact. If the check is OK, replace the PWB. De-actuate the Switch. The display changed. Y↓N→Disconnect the connector on the Switch. The display changed. Y↓N→Check for a short between the switch Pin 2 and the PWB Pin 3. If the check is OK, replace the PWB. Replace the Switch. Replace the Switch.

← Xem tất cả mã lỗi Xerox Phaser 7760

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie