Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 309.608 — Xerox Phaser 7800

Code: 309.608

Description: 1/2/3/4 Yellow/ Magenta/ Cyan/ Black Developer Housing/ Developer Beads End of Life The Yellow/ Magenta/ Cyan/ Black Developer Housing Developer Beads has reached the end of its life span.
Remedy: The rated life of the developer housing and beads is 480K prints. If this fault occurs at an unexpected time or if this fault does not occur at expected timing, check the following: 1. Check the HFSI counter for the developer or beads corresponding to the chain link displayed. • From the Control Menu menu, select Printer > Tools > Setup > Service Tools > Service Diagnostics > Maintenance > dc135 (dc135 CRU/HFSI Status and Reset). • Select Reset HFSI > Developer X Counters. If the message is premature, reset the Developer life counter, perform the following procedure.
1. Replace the effected Developer and beads. Reset the HFSI counter for the Developer(s) that was replaced in. 2. From the Control Menu, select Printer > Tools > Setup > Service Tools > Service Diagnostics > Maintenance > dc135 (dc135 CRU/HFSI Status and Reset). NOTE: Check the remaining life on the other Developers. If they are also near the end of their life, all developers and beads near end of life should be replaced on the same service call.

← Xem tất cả mã lỗi Xerox Phaser 7800

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie