Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 309.612.00 — Xerox Phaser 7800

Code: 309.612.00

Description: Fuser EOL The Fuser has reached the end of life.
Remedy: The rated life of the fuser is 360K letter/A4 prints. If this fault occurs at an unexpected time or a replacement fuser does not reset the EOL message, check the following: Condition 1 - Existing Fuser 1. If this fault occurs prematurely, check the HFSI counter for the fuser corresponding to the status chain link displayed. • From the Control Panel menu, select Printer > Tools > Setup > Service Tools > Service Diagnostics > Maintenance > dc135 (dc135 CRU/HFSI Status and Reset). • Select Reset HFSI > Fuser Counters. If the message is premature, reset the fuser life counter, otherwise perform the following procedure. Condition 2 - New Fuser The customer could be trying to use a Fuser that was installed briefly in the printer for troubleshooting purposes. If this is the case the new Fuser fuse would have been blown and the printer can't sense that the Fuser is a new replacement. 1. In this case the Fuser life can be reset: From the Control Panel menu, select Printer > Tools > Setup > Service Tools > Service Diagnostics > Maintenance > dc135 (dc135 CRU/HFSI Status and Reset). Select Reset HFSI > Fuser Counters.

← Xem tất cả mã lỗi Xerox Phaser 7800

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie