Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 310.363 — Xerox Phaser 7800

Code: 310.363

Description: IGBT Temperature High Fault. The IGBT Temperature Sensor detected high temperature. (Status code 0x4 is received)
Remedy: Turn the power Off and remove the Rear Upper Cover. Disconnect the connector P592 of the MD PWB and open the Chassis Assembly. Turn the power On and enter the Service Diagnostics Menu (Entering Service Diagnostics). Turn On dc330 Component Control [042-016] (IH Intake Fan). Is the IH Intake Fan rotating? Y↓ N→Proceed to the 342.332 RAP. Is the IH Exhaust Fan rotating? Y↓ N→Proceed to the 342.330 RAP. Press the Stop button. Turn the power Off and check the connection between the IH Driver P/J530 and the MCU PWB P/J414 for open circuit, short circuit, and poor contact. If no problems are found, replace the following parts in sequence: • IH Driver PWB • MCU PWB

← Xem tất cả mã lỗi Xerox Phaser 7800

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie