Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 310.367 — Xerox Phaser 7800

Code: 310.367

Description: Input Low Current Fault. The input current was below the lower limit continuously for the specified time. (Status code 0x8 is received)
Remedy: Turn the power Off and remove the Fuser Assembly. Inspect the Drawer Connector between the Fuser Assembly and the Main Unit ( DJ600) for broken/bent pins, foreign substances, burns, and etc.
• The relay connector P/J634 for poor contact • The connection between the IH Driver T60 and the Fuser Assembly DJ600-1 for short circuit and poor contact • The connection between the IH Driver T61 and the Fuser Assembly DJ600-3 for short circuit and poor contact If no problems are found, replace the following parts in sequence: • IH Driver PWB • Fuser Assembly • MCU PWB

← Xem tất cả mã lỗi Xerox Phaser 7800

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie