Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 310.368 — Xerox Phaser 7800

Code: 310.368

Description: Encoder Pulse Fault. The level change of the Belt Speed Sensor was in less than 1 second. (Status code 0x9 is received)
Remedy: • Turn the power Off and remove the Fuser Assembly. Inspect the Drawer Connector between the Fuser Assembly and the Main Unit ( DJ600) for broken/bent pins, foreign substances, burns, and etc. • Check whether the MCU PWB connector P/J431 is connected properly.
Check the following connections for short circuits and poor contacts. • Between MCU PWB P/J431-12 and Fuser Assembly DJ600-B7 • Between MCU PWB P/J431-13 and Fuser Assembly DJ600-B6 • Between MCU PWB P/J431-14 and Fuser Assembly DJ600-B5 If no problems are found, replace the following parts in sequence: • Fuser Assembly • MCU PWB

← Xem tất cả mã lỗi Xerox Phaser 7800

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie