Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 310.372 — Xerox Phaser 7800

Code: 310.372

Description: Heat Roll STS Center Over Temperature Fault. The AD value of the Center Thermistor was detected to be higher than the defined value 4 times in a row.
Remedy: • Turn the power Off and remove the Fuser Assembly. Check whether foreign substances or paper is wound around the Heat Roll. • Inspect the Drawer Connector between the Fuser Assembly and the Main Unit ( DJ600) for broken/bent pins, foreign substances, burns, and etc. • Check whether the MCU PWB connector P/J431 is connected properly.
Check the following connections for short circuits and poor contacts. • Between DJ600-A5 and MCU PWB P/J431-7 • Between DJ600-A4 and MCU PWB P/J431-8 If no problems are found, replace the following parts in sequence: • Fuser Assembly • MCU PWB

← Xem tất cả mã lỗi Xerox Phaser 7800

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie