Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 310.375 — Xerox Phaser 7800

Code: 310.375

Description: Heat Belt STS Center Warm Up Time Fault. When transitioning from the Wait state, the specified Temperature is not reached within the specified time.
Remedy: Enter dc122 Fault History. Check whether IH Driver Input Low Voltage Fault has occurred. Has Fault 310.361 occurred? Y↓ N→Turn the power Off and check the following: • Remove the Fuser Assembly. Inspect the Drawer Connector between the Fuser Assembly and the Main Unit ( DJ600) for broken/bent pins, foreign substances, burns, and etc. • The connection between the DJ600-A4/A5 and the MCU PWB P/J431-8/7 for open circuit, short circuit, and poor contact If no problems are found, replace the following parts in sequence: • Fuser Assembly • MCU PWB Proceed to the 310.361 RAP.

← Xem tất cả mã lỗi Xerox Phaser 7800

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie