Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 310.382 — Xerox Phaser 7800

Code: 310.382

Description: Fuser Thermostat Fault. The Fuser Assembly Thermostat is broken.
Remedy: • Turn the power Off and remove the Fuser Assembly. Inspect the Drawer Connector between the Fuser Assembly and the Main Unit ( DJ600) for broken/bent pins, foreign substances, burns, and etc. • Check whether the MCU PWB connector P/J431 is connected properly.
Measure the resistance between P600 pin-A11 and P600 pin-B9. Is the resistance infinite? Y↓ N→Check the following connections for open circuits, short circuits, and poor contacts. • Between DJ600-A1 and MCU PWB P/J431-11 • Between DJ600-B1 and MCU PWB P/J431-18 If no problems are found, replace the MCU PWB. Replace the Fuser Assembly.

← Xem tất cả mã lỗi Xerox Phaser 7800

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie