Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 310.398 — Xerox Phaser 7800

Code: 310.398

Description: Fuser Fan Fault. The Fuser Fan error was detected.
Remedy: Rotate the Fuser Fan manually to check for loading.
Enter dc122 Fault History. Has 041-350 faults (MD PWB F7 Open) occurred? Y↓ N→Enter Service Diagnostics menu (Entering Service Diagnostics). Turn On dc330 Component Control [042-025] (NOHAD FAN Failure Detection). Is the Fuser Fan rotating and does the test return a fuser fan error? Y↓ N→Turn the power Off and check the connection between the Fuser Fan P/J230-4/3/1 and the MD PWB P/J524-10/11/13 for open circuit, short circuit, and poor contact. If no problems are found, replace the following parts in sequence: • Fuser Fan • MD PWB • MCU PWB Replace the Fuser Fan. Press the Stop button and turn the power Off. Check the connection between the Fuser Fan P/J230-2 and the MD PWB P/J524-12 for open circuit, short circuit, and poor contact. If no problems are found, replace the following parts in sequence: • MD PWB • MCU PWB Go to the 341.350 RAP.

← Xem tất cả mã lỗi Xerox Phaser 7800

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie