Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 312.211 — Xerox Phaser 7800

Code: 312.211

Description: Stacker Tray Fault. The Stack Height Sensor did not turn Off in 500msec after the Stacker Tray started to drive down. The Tray Height Sensor Lower did not turn On in 5000msec after the Stacker Tray started lifting up.
Remedy: • The Stack Height Sensor for improper installation. • The Stack Height Sensor connectors for connection failure. • The Tray Height Sensor Lower for improper installation. • The Tray Height Sensor Lower connectors for connection failure. • The Elevator Motor for operation failure. • The Elevator Motor connectors for connection failure. • The Elevator Gear for deformation.
Enter dc330 Component Control [012-061] Elevator Motor Down and [012-060] Elevator Motor Up (PL 24.31 Item 26), alternately. Select Start. The Elevator Motor runs. Y↓ N→Select Stop. Go to Finisher Stacker Drive. Check continuity between the Elevator Motor and Finisher PWB. The continuity check is OK. Y↓ N→Repair the open circuit or short circuit. Replace the Elevator Motor. If the problem continues, replace the Finisher Main PWB. Select Stop. If the problem continues, replace the Finisher Main PWB.

← Xem tất cả mã lỗi Xerox Phaser 7800

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie