Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 312.223 — Xerox Phaser 7800

Code: 312.223

Description: Front Tamper Home Sensor Off Fault. Front Tamper Home Sensor is not turned off within a specified time. Front Tamper Home Sensor is not turned off after the stop following Front Tamper Home Sensor Off.
Remedy: • The Front Tamper Actuator for deformation • The Front Tamper Home Sensor for proper installation • The Front Tamper Home Sensor connectors • The Front Tamper Motor for proper operation • The Front Tamper Motor connectors
Enter dc330 Component Control [012-020] and [012-023], Front Tamper Motor (PL 24.35 Item 6), alternately. Select Start. The Front Tamper Motor runs. Y↓ N→Select Stop. Go to Finisher Tamper Control. Check circuit of the Front Tamper Motor. Refer to Transmissive Sensor RAP for troubleshooting procedure. Select Stop. Select [012-220], Front Tamper Home Sensor (PL 24.35 Item 2). Select Start. Actuate the sensor with a piece of paper. The display changes. Y↓ N→Select Stop. Go to Finisher Tamper Control. Check circuit of the Front Tamper Home Sensor. Refer to Transmissive Sensor RAP for troubleshooting procedure. Select Stop. If the problem continues, replace the Finisher Main PWB.

← Xem tất cả mã lỗi Xerox Phaser 7800

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie