Code: 312.228
Description: Booklet End Guide Home Sensor On Fault. Booklet End Guide Home Sensor is not turned on within 2000ms from motor On while Booklet End Guide is returning to Home.
Remedy: • The Booklet End Guide Home Sensor for improper installation • The Booklet End Guide Home Sensor connectors for connection failure • The Booklet End Guide Motor connectors for connection failure • The Guide for deformation • The Guide for a foreign substance
Enter dc330 Component Control [013-013] and [013-016], Booklet End Guide Motor (PL 24.53 Item 2), alternately. Select Start. The Booklet End Guide Motor energizes. Y↓ N→Select Stop. Go to Booklet End Guide Control. Check continuity between the Booklet End Guide Motor and the Booklet PWB and the Booklet PWB and the Finisher PWB. The continuity check is OK. Y↓ N→Repair the open circuit or short circuit. Replace the Booklet End Guide Motor (PL 24.53 Item 2). If the problem continues, replace the Booklet PWB (PL 24.51 Item 1). If the problem persists, replace Finisher Main PWB. Select Stop. Enter dc330 Component Control [013-137] Booklet End Guide Home Sensor. Select Start. Block/unblock the Booklet End Guide Home Sensor. The display changes. Y↓ N→Select Stop. Go to Booklet End Guide Control. Check continuity between the Booklet End Guide Home Sensor and the Booklet PWB and the Booklet PWB and the Finisher PWB. The continuity check is OK. Y↓ N→Repair the open circuit or short circuit. Replace the Booklet End Guide Home Sensor (PL 24.53 Item 7). If the problem continues, replace the Booklet PWB (PL 24.51 Item 1). If the problem persists, replace Finisher Main PWB. Check the following: • The Booklet End Guide Motor for proper installation • Booklet End Guide Belt for proper tension • Booklet End Guide Belt for wear or damage If the above checks are OK, replace the Finisher Main PWB.
Enter dc330 Component Control [013-013] and [013-016], Booklet End Guide Motor (PL 24.53 Item 2), alternately. Select Start. The Booklet End Guide Motor energizes. Y↓ N→Select Stop. Go to Booklet End Guide Control. Check continuity between the Booklet End Guide Motor and the Booklet PWB and the Booklet PWB and the Finisher PWB. The continuity check is OK. Y↓ N→Repair the open circuit or short circuit. Replace the Booklet End Guide Motor (PL 24.53 Item 2). If the problem continues, replace the Booklet PWB (PL 24.51 Item 1). If the problem persists, replace Finisher Main PWB. Select Stop. Enter dc330 Component Control [013-137] Booklet End Guide Home Sensor. Select Start. Block/unblock the Booklet End Guide Home Sensor. The display changes. Y↓ N→Select Stop. Go to Booklet End Guide Control. Check continuity between the Booklet End Guide Home Sensor and the Booklet PWB and the Booklet PWB and the Finisher PWB. The continuity check is OK. Y↓ N→Repair the open circuit or short circuit. Replace the Booklet End Guide Home Sensor (PL 24.53 Item 7). If the problem continues, replace the Booklet PWB (PL 24.51 Item 1). If the problem persists, replace Finisher Main PWB. Check the following: • The Booklet End Guide Motor for proper installation • Booklet End Guide Belt for proper tension • Booklet End Guide Belt for wear or damage If the above checks are OK, replace the Finisher Main PWB.