Code: 312.229
Description: Booklet Tamper R Home Sensor On Fault. Tamper Home Sensor Rear is not turned on within 1000msec from motor On while Booklet Tamper Rear is returning to Home.
Remedy: • The Booklet Tamper Home Sensor Rear for improper installation • The Booklet Tamper Home Sensor Rear connectors for connection failure • The Booklet Tamper Motor Rear connectors for connection failure • The Booklet Tamper Motor Rear for improper installation • The gear part for wear or damage • The Booklet Tamper Rear for deformation
Enter dc330 Component Control [013-056] and dc330 Component Control [013-060], Booklet Rear Tamper Motor (PL 24.55 Item 9), alternately. Select Start. The Booklet Tamper Motor Rear energizes. Y↓ N→Select Stop. Go to Booklet Tamper Control (1 of 2). Check continuity between the Booklet Rear Tamper Motor and the Booklet PWB and the Booklet PWB and the Finisher PWB. The continuity check is OK. Y↓ N→Repair the open circuit or short circuit. Replace the Booklet Rear Tamper Motor (PL 24.55 Item 9). If the problem continues, replace the Booklet PWB (PL 24.51 Item 1). If the problem persists, replace Finisher Main PWB. Select Stop. Select [013-136], Booklet Front Tamper Home Sensor (PL 24.55 Item 10). Select Start. Block/unblock the Booklet Tamper Home Sensor Front. The display changes. Y↓ N→Select Stop. Go to Booklet Tamper Control (2 of 2). Check continuity between the Booklet Rear Tamper Home Sensor and the Booklet PWB and the Booklet PWB and the Finisher PWB. The continuity check is OK. Y↓ N→Repair the open circuit or short circuit. Replace the Booklet Tamper Home Sensor Rear (PL 24.55 Item 7). If the problem continues, replace the Booklet PWB (PL 24.51 Item 1). If the problem persists, replace Finisher Main PWB. Select Stop. If the problem continues, replace the Finisher Main PWB.
Enter dc330 Component Control [013-056] and dc330 Component Control [013-060], Booklet Rear Tamper Motor (PL 24.55 Item 9), alternately. Select Start. The Booklet Tamper Motor Rear energizes. Y↓ N→Select Stop. Go to Booklet Tamper Control (1 of 2). Check continuity between the Booklet Rear Tamper Motor and the Booklet PWB and the Booklet PWB and the Finisher PWB. The continuity check is OK. Y↓ N→Repair the open circuit or short circuit. Replace the Booklet Rear Tamper Motor (PL 24.55 Item 9). If the problem continues, replace the Booklet PWB (PL 24.51 Item 1). If the problem persists, replace Finisher Main PWB. Select Stop. Select [013-136], Booklet Front Tamper Home Sensor (PL 24.55 Item 10). Select Start. Block/unblock the Booklet Tamper Home Sensor Front. The display changes. Y↓ N→Select Stop. Go to Booklet Tamper Control (2 of 2). Check continuity between the Booklet Rear Tamper Home Sensor and the Booklet PWB and the Booklet PWB and the Finisher PWB. The continuity check is OK. Y↓ N→Repair the open circuit or short circuit. Replace the Booklet Tamper Home Sensor Rear (PL 24.55 Item 7). If the problem continues, replace the Booklet PWB (PL 24.51 Item 1). If the problem persists, replace Finisher Main PWB. Select Stop. If the problem continues, replace the Finisher Main PWB.