Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 312.231 — Xerox Phaser 7800

Code: 312.231

Description: Punch Home Sensor On Fault. The Punch Home Sensor did not turn ON within the specified time after the Punch Motor started running.
Remedy: • Punch Home Actuator for deformation • Punch Home Sensor for proper installation • Punch Home Sensor connectors • Punch Motor for proper operation • Punch Motor connectors
Enter dc330 Component Control [12-074] and [12-078], Punch Motor (PL 23.5), alternately. Select Start. The Punch Motor runs. Y↓ N→Select Stop. Check circuit of the Punch Motor. Refer to (dc330 Component Control) to troubleshoot the Circuit. Select Stop. Select [12-271], Punch Home Sensor (PL 23.5). Select Start. Actuate the sensor with a piece of paper. The display changes. Y↓ N→Go to dc330 Component Control. Check circuit of the Punch Home Sensor. Select Stop. If the problem continues, replace the Finisher PWB.

← Xem tất cả mã lỗi Xerox Phaser 7800

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie