Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 312.231 — Xerox Phaser 7800

Code: 312.231

Description: Puncher Home Sensor On Fault. The Puncher Home Sensor did not turn On within the specified time after the Puncher Motor started running.
Remedy: • The Puncher Home Actuator for deformation • The Puncher Home Sensor for proper installation • The Puncher Home Sensor connectors • The Puncher Motor for proper operation • The Puncher Motor connectors
Enter dc330 Component Control [012-078] and [012-075], Puncher Move Motor (PL 24.32 Item 15), alternately. Select Start. The Puncher Motor runs. Y↓ N→Select Stop. Go to BSD 14 22 Finisher Punch Drive. Check circuit of the Punch Motor. Refer to Multiple Wire Motor RAP for troubleshooting procedure. Select Stop. Select [012-271], Puncher Move Home Sensor. Select Start. Actuate the sensor with a piece of paper. The display changes. Y↓ N→Go to Finisher Punch Hole Control. Check circuit of the Puncher Home Sensor. Refer to Transmissive Sensor RAP for troubleshooting procedure. Select Stop. If the problem continues, replace the Finisher Main PWB.

← Xem tất cả mã lỗi Xerox Phaser 7800

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie