Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 312.266 — Xerox Phaser 7800

Code: 312.266

Description: Booklet Compiler No Paper Sensor Fault. The Booklet Compile No Paper Sensor did not turn On within the specified time.
Remedy: Enter dc330 Component Control [013-102], Booklet Compile No Paper Sensor (PL 24.54 Item 18). Select Start. Block/unblock the Booklet Compile No Paper Sensor. The display changed. Y↓ N→Select Stop. Go to Finisher Compiling. Check continuity between the Booklet Compile No Paper and the Booklet PWB and between the Booklet PWB and the Finisher PWB. The continuity check is OK. Y↓ N→Repair the open circuit or short circuit. Replace the Booklet Compile No Paper Sensor (PL 24.54 Item 18). If the problem continues, replace the Booklet PWB (PL 24.51 Item 1). If the problem persists, replace Finisher Main PWB. Select [013-064], Booklet Paper Path Motor (PL 24.58 Item 4). Select Start. The Motor energizes. Y↓ N→Select Stop. Go to Booklet Drive. Check continuity between the Booklet Paper Path Motor and the Booklet PWB and between the Booklet PWB and the Finisher PWB. The continuity check is OK. Y↓ N→Repair the open circuit or short circuit. Replace the Booklet Paper Path Motor (PL 24.58 Item 4). If the problem continues, replace the Booklet PWB (PL 24.51 Item 1). If the problem persists, replace Finisher Main PWB. Select Stop. If the problem persists, replace Finisher Main PWB.

← Xem tất cả mã lỗi Xerox Phaser 7800

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie