Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 312.300 — Xerox Phaser 7800

Code: 312.300

Description: Eject Cover Open. Eject Cover Switch open was detected.
Remedy: • Ensure that the Eject Cover is down • Check Eject Cover Switch for improper installation • Check Eject Cover Switch connectors for connection failure • Check Actuator part for deformation
Enter dc330 Component Control [012-300], Eject Cover Switch (PL 24.34 Item 21). Select Start. Actuate the Eject Cover Switch. The display changes Y↓ N→Select Stop. Check continuity of the Eject Cover Switch. The continuity check is OK. Y↓ N→Replace the Eject Cover Switch. Go to Finisher Interlocks. Check continuity between the Eject Cover Switch and the Finisher PWB. If the check is OK, replace the Finisher Main PWB. Select Stop. If the problem continues, replace the Finisher Main PWB.

← Xem tất cả mã lỗi Xerox Phaser 7800

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie