Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 312.303 — Xerox Phaser 7800

Code: 312.303

Description: H-Transport Cover Open. H-Transport Interlock Sensor-L Open was detected.
Remedy: • The H-Transport Interlock Sensor-L for improper installation • Check for obstruction in between the H-Transport Cover and the H-Transport paper transport area • The H-Transport Cover Interlock Sensor connectors for connection failure • The Actuator for deformation
Select Start. Block and unblock the H-Transport Interlock Sensor-L. The display changes. Y↓ N→+5 VDC is measured between the H-Transport Interlock Sensor P/J8445--1 and -3. Y↓ N→Go to Finisher Horizontal Transportation (2 of 2). Disconnect J8310 on Finisher PWB. +5 VDC is measured between H Transport Interlock Sensor P/ P/ J8445-1 and -3. Y↓ N→Replace the H-Transport PWB (PL 24.44 Item 19). Check for an open circuit between H-Transport PWB P/J8396-3 and -1 and H-Transport Interlock Sensor P/J8445-1 and -3. +5 VDC is measured between Finisher PWB J8310-20 and ground. Y↓ N→Replace the Finisher Main PWB +5 VDC is measured at the H-Transport Interlock Sensor J8445-2 and ground. Y↓ N→Check for an open circuit between H-Transport Interlock Switch P/J8445-1 and HTransport Interlock Sensor P/J8445-2. Replace the H-Transport Interlock Sensor. Select Stop. Check the following: • Alignment between the H-Transport Cover and the H-Transport Interlock Sensor • The H-Transport Cover for proper installation • The Actuator for bending or alignment • The Magnets for proper mounting

← Xem tất cả mã lỗi Xerox Phaser 7800

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie