Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 312.350 — Xerox Phaser 7800

Code: 312.350

Description: Finisher Communication. Communication is not established between the MD PWB and the Finisher PWB in A/P Finisher.
Remedy: Switch the machine power Off and On. The 012-350 is still present. Y↓ N→Return to Service Call Procedures. Check P/J8300 on the Finisher PWB and J590 on the MD PWB for a secure connection (Finisher Detection & Communication). Check the condition of the wires. Check the connections between the A/P Finisher and the IOT. If the connectors were recently disconnected and reconnected check for damaged pins. Check for less than 1 VDC at P/J590-1 on the MD PWB. Less than 1 VDC is measured. Y↓ N→Check the wire between P/J590-1 on the MD PWB and J8300-11 on the Finisher PWB for damage or a break. Repair as required. If the wire is good, replace the MD PWB. Replace the Finisher Main PWB.

← Xem tất cả mã lỗi Xerox Phaser 7800

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie