Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 312.903 — Xerox Phaser 7800

Code: 312.903

Description: Paper at Compiler Exit Sensor. Control logic reports paper at the Compiler Exit Sensor.
Remedy: • Paper on the Compiler Exit Sensor • Obstructions in the paper path
Enter dc330 Component Control [012-150], Compiler Exit Sensor (PL 24.36 Item 3). Select Start. Open the H-Transport Cover and actuate the Compiler Exit Sensor. The display changes. Y↓ N→Select Stop. Go to Finisher Compiling. Check the circuit of the Compiler Exit Sensor. Refer to the Transmissive Sensor RAP for troubleshooting procedure. Select Stop. Check the following: • Ensure that the connectors shown in the circuit diagrams are securely connected and that the wires are not damaged • Exit Motor Belt for wear or damage • Exit Pinch Rollers 1 and 2 for damage • Lower Exit Roller for wear or damage • Synchronous Belt for wear or damage If the above checks are OK, then replace the Compiler Exit Sensor. If the problem continues, replace the Finisher Main PWB.

← Xem tất cả mã lỗi Xerox Phaser 7800

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie