Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 312.903 — Xerox Phaser 7800

Code: 312.903

Description: Paper Remains at Compiler Exit Sensor. Paper remains on the Compiler Exit Sensor.
Remedy: Check the paper path. If no paper is found continue with this RAP. Clean the Sensor.
Execute dc330 Component Control [012-150], Compiler Exit Sensor. Actuate the Compiler Exit Sensor (PL 23.14). The display changes. Y↓ N→Check the wire between J8869 pin 2 and P/J8988 pin 5 for an open or short circuit, or a loose or damaged connector. The wire is OK. Y↓ N→Repair/reconnect as required. Measure the voltage between P/J8988, pins 3 and 1 on the Finisher PWB (Finisher Paper Transportation). The voltage is approx. +5VDC. Y↓ N→Replace the Finisher PWB. Measure the voltage between P/J8988, pin 5 on the Finisher PWB and GND (Finisher Paper Transportation). Actuate the Compiler Exit Sensor. The voltage changes. Y↓ N→Replace the Compiler Exit Sensor (PL 23.14). Replace the Finisher PWB. If the problem continues, replace the Finisher PWB.

← Xem tất cả mã lỗi Xerox Phaser 7800

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie