Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 312.905 — Xerox Phaser 7800

Code: 312.905

Description: Compiler Tray No Paper Sensor Static Jam. Paper remains on the Compiler Tray No Paper Sensor.
Remedy: Check the paper path. If no paper is found continue with this RAP.
Enter dc330 Component Control [012-151], Compiler Tray No Paper Sensor. Select Start. Actuate the Compiler Tray No Paper Sensor. The display changes. Y↓ N→Check the wire between J8880 pin 2 and J8984 pin 2 on the Finisher PWB for an open or short circuit, or a loose or damaged connector. The wire is OK. Y↓ N→Repair/reconnect as required. Measure the voltage between J8984 pins 3 and 1 on the Finisher PWB (Tamping Control (2 of 2)). The voltage is approx. +5VDC. Y↓ N→Replace the Finisher PWB. Measure the voltage between J8984 pin 2 on the Finisher PWB and GND (Tamping Control (2 of 2)). Actuate the Compiler Tray No Paper Sensor. The voltage changes. Y↓ N→Replace the Compiler Tray No Paper Sensor (PL 23.12). Replace the Finisher PWB. If the problem continues, replace the Finisher PWB.

← Xem tất cả mã lỗi Xerox Phaser 7800

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie