Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 312.907 — Xerox Phaser 7800

Code: 312.907

Description: Paper at Top Tray Exit Sensor. Control logic reports paper at the Top Tray Exit Sensor.
Remedy: • Paper on the Top Tray Exit Sensor • Obstructions in the paper path
Enter dc330 Component Control [012-115], Top Tray Exit Sensor (PL 24.38 Item 11). Select Start. Actuate the Top Tray Exit Sensor. The display changes. Y↓ N→Select Stop. Go to Finisher Top Tray Stacking. Check the circuit of the Top Tray Exit Sensor. Refer to the Transmissive Sensor RAP for troubleshooting procedure. Select Stop. Check the following: • Ensure that the connectors shown in the circuit diagrams are securely connected and that the wires are not damaged • Exit Motor Belt for wear or damage • Exit Drive Shaft Rolls for wear or damage • Exit Pinch Rollers for wear or damage • Synchronous Belt for wear or damage If the above checks are OK, then replace the Top Tray Exit Sensor. If the problem continues, replace the Finisher Main PWB.

← Xem tất cả mã lỗi Xerox Phaser 7800

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie