Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 312.910 — Xerox Phaser 7800

Code: 312.910

Description: Staple Ready Sensor Fault. Staple Ready Sensor is turned off at stapling start.
Remedy: Enter dc330 Component Control [012-243], Stapler Ready Sensor, (part of Stapler Assembly) (PL 24.33 Item 2). Select Start. Block/unblock the Stapler Ready Sensor. The display changed. Y↓ N→Select Stop. Go to Finisher Stapler Control. Check continuity between the Stapler Ready Sensor and Finisher PWB. The continuity check is OK. Y↓ N→Repair the open circuit or short circuit. Replace the Stapler (PL 24.33 Item 2). If the problem continues, replace the Finisher Main PWB. Select Stop. Check the following: • Wiring between the Stapler and the Finisher PWB • Obstructions on the Stapler Upper Rail • Stapler Move Motor Gear If the above checks are OK. replace the Finisher Main PWB.

← Xem tất cả mã lỗi Xerox Phaser 7800

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie