Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 312.922 — Xerox Phaser 7800

Code: 312.922

Description: Paper at Gate Sensor (Buffer Path Job). Control logic reports paper at the Gate Sensor.
Remedy: • Check for obstructions in the paper path • Check the Finisher Drive Motor Gears and Drive rolls for wear or damage
Enter dc330 Component Control [012-102], Gate Sensor (PL 24.43 Item 19). Select Start. Actuate the Gate Sensor. The display changes. Y↓ N→Select Stop. Go to Finisher Transport, Top Tray Gating. Check the circuit of the Gate Sensor. Refer to the Transmissive Sensor RAP for troubleshooting procedure. Select Stop. Check the following: • Ensure that the connectors shown in the circuit diagrams are securely connected and that the wires are not damaged. • Check the Finisher is docked properly • Check the Finisher Transport Motor and its associated gears and belts for damage, contamination or misalignment. If the above checks are OK, then replace the Gate Sensor. If the problem persists, replace the Finisher Main PWB.

← Xem tất cả mã lỗi Xerox Phaser 7800

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie