Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 312.923 — Xerox Phaser 7800

Code: 312.923

Description: H-Transport Entrance Sensor Static Jam. During standby, paper was detected by the H-Transport Entrance Sensor.
Remedy: Check the paper path. If no paper is found continue with this RAP.
Execute dc330 Component Control [012-190], H-Transport Entrance Sensor. Actuate the HTransport Entrance Sensor (PL 23.4 Item 6). The display changes. Y↓ N→Check the wire between P/J8861 pin 2 and J8987 pin 6 for an open or short circuit, or a loose or damaged connector. The wire is OK. Y↓ N→Repair/reconnect as required. Measure the voltage between J8987, pins 4 and 5 on the Finisher PWB (Finisher Paper Transportation). The voltage is approx. +5VDC. Y↓ N→Replace the Finisher PWB (PL 23.16). Measure the voltage between J8987, pin 6 on the Finisher PWB and GND (Finisher Paper Transportation). Actuate the H-Transport Entrance Sensor. The voltage changes. Y↓ N→Replace the H-Transport Entrance Sensor (PL 23.4). Replace the Finisher PWB. If the problem continues, replace the Finisher PWB.

← Xem tất cả mã lỗi Xerox Phaser 7800

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie