Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 312.925 — Xerox Phaser 7800

Code: 312.925

Description: Stacker Lower Safety Warning. Stack Height Sensor 1 Off is not detected 500ms after the stacker starts going down and this occurs three times.
Remedy: Check for obstacles in the under the Stacker Tray. The problem is resolved. Y↓ N→Enter dc330 Component Control [012-264] Stacker Height Sensor 1. Select Start. Move the Stacker Tray manually. The display changes. Y↓ N→Go to Finisher Stack Height Detection. Check the circuit of Stack Height Sensor 1 (PL 24.31 Item 13). If the Sensor and wiring are OK, replace the Finisher Main PWB. Select Stop. Replace the Finisher Main PWB. If the problem continues, replace the Finisher Main PWB.

← Xem tất cả mã lỗi Xerox Phaser 7800

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie