Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 312.935 — Xerox Phaser 7800

Code: 312.935

Description: Paper at Transport Entrance Sensor. Control logic reports paper at the Transport Entrance Sensor.
Remedy: • Check for obstructions in the paper path • Check that the Finisher is docked correctly to ensure proper Transport Gate operation
Enter dc330 Component Control [012-100], Transport Entrance Sensor (PL 24.41 Item 19). Select Start. Actuate the Transport Entrance Sensor. The display changes. Y↓ N→Select Stop. Go to Finisher Transport, Top Tray Gating. Check the circuit of the Transport Entrance Sensor. Refer to the Transmissive Sensor RAP for troubleshooting procedure. Select Stop. Check the following: • Ensure that the connectors shown in the circuit diagrams are securely connected and that the wires are not damaged. • Check the H-Transport Motor and its associated gears and belts for damage, contamination or alignment. • Check the Finisher Transport Motor and its associated gears and belts for damage, contamination or alignment. If the above checks are OK, then replace the Transport Entrance Sensor. If the problem persists, replace the Finisher Main PWB.

← Xem tất cả mã lỗi Xerox Phaser 7800

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie