Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 312.935 — Xerox Phaser 7800

Code: 312.935

Description: Paper at Finisher Entrance Sensor. Control logic reports paper at the Finisher Entrance Sensor.
Remedy: • Check for obstructions in the paper path • Check that the Finisher is docked correctly to ensure proper Transport Gate operation.
Enter dc330 Component Control [012-100], Finisher Entrance Sensor. Select Start. Actuate the Finisher Entrance Sensor. The display changes. Y↓ N→Check the wire between J8868 pin 2 and P/J8988 pin 2 for an open or short circuit, or a loose or damaged connector. The wire is OK. Y↓ N→Repair/reconnect as required. Measure the voltage between P/J8988 pins 3 and 1 on the Finisher PWB (Finisher Paper Transportation). The voltage is approx. +5VDC. Y↓ N→Replace the Finisher PWB. Measure the voltage between P/J8988 pin 2 on the Finisher PWB and GND (Finisher Paper Transportation). Actuate the Finisher Entrance Sensor. The voltage changes. Y↓ N→Replace the Finisher Entrance Sensor (PL 23.14 Item 10). Replace the Finisher PWB. Replace the Finisher PWB.

← Xem tất cả mã lỗi Xerox Phaser 7800

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie