Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 312.945 — Xerox Phaser 7800

Code: 312.945

Description: Low Staples. The Low Staple Sensor turned On just before the Staple Motor started running.
Remedy: • Stapler Head connectors for connection failure • Staple remaining amount
Enter dc330 Component Control [012-242], Low Staple Sensor. Select Start. ‘LOW’ (staples available) is displayed. Y↓ N→Select Stop. Go to Finisher Stapler Control. Check continuity between the Stapler Head and Finisher PWB. The continuity check is OK. Y↓ N→Repair the open circuit or short circuit. Replace the Stapler Assembly. If the problem continues, replace the Finisher Main PWB. If the problem continues, replace the Finisher Main PWB.

← Xem tất cả mã lỗi Xerox Phaser 7800

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie