Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 312.946 — Xerox Phaser 7800

Code: 312.946

Description: Top Tray Full. The Top Tray Full Sensor was turned On for 10sec continuously.
Remedy: • The Top Tray Full Sensor for improper installation • The Top Tray Full Sensor connectors for connection failure • The Top Tray Full Sensor Actuator for deformation and operation failure
Enter dc330 Component Control [012-215], Top Tray Full Sensor, (PL 24.38 Item 9). Select Start. Actuate the Top Tray Full Sensor. The display changes. Y↓ N→Select Stop. Go to Finisher Top Tray Stacking Check continuity between the Top Tray Full Sensor and Finisher PWB. The continuity check is OK. Y↓ N→Repair the open circuit or short circuit. Replace the Top Tray Full Sensor. If the problem continues, replace the Finisher Main PWB. Select Stop. If the problem continues, replace the Finisher Main PWB.

← Xem tất cả mã lỗi Xerox Phaser 7800

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie