Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 312.948 — Xerox Phaser 7800

Code: 312.948

Description: Puncher Waste Bin Nearly Full. Cumulative punching count reached the specified times (2-hole punching: 5000 times, 4-hole punching: 2500 times).
Remedy: Remove the Puncher Waste Bin (PL 24.32 Item 29) and discard its dust. Install the Puncher Waste Bin. The problem is resolved. Y↓ N→Enter dc330 Component Control [012-275], Puncher Set Sensor (PL 24.32 Item 6). Select Start. Remove and insert the Puncher Waste Bin. The display changes. Y↓ N→Select Stop. Go to Finisher Booklet/ Punch Transport. Check continuity between the Puncher Box Set Sensor and Finisher PWB. The continuity check is OK. Y↓ N→Repair the open circuit or short circuit. Replace the Puncher Box Set Sensor. If the problem continues, replace the Finisher Main PWB. Select Stop. Replace the Finisher Main PWB. Ensure the Puncher Waste Bin is installed properly.

← Xem tất cả mã lỗi Xerox Phaser 7800

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie