Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 324.917 — Xerox Phaser 7800

Code: 324.917

Description: Stacker Tray Staple Set Over Limit
Remedy: During detection of staple sheet count, if over 50 sheets are detected (Stapling limit), this error will be generated. If this chain link code is generated in error, check the following: • Check for a defective stacker no paper sensor. See Stacker Tray Control. Execute dc330 Component Control [012-262], Stacker No Paper Sensor and repair or replace as necessary. • Defective wiring, Check the continuity of the wiring as shown in PWBS Communication from J8989 on the Finisher PWB to P/J590 on the MD PWB. • Defective Finisher PWB.

← Xem tất cả mã lỗi Xerox Phaser 7800

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie