Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 342.325 — Xerox Phaser 7800

Code: 342.325

Description: Main Motor Fail.
Remedy: Turn the power Off. Remove the IBT Unit and cheat the L/H Cover Interlock Switch. Turn the power On and enter Service Diagnostics (Entering Service Diagnostics). Turn On dc330 Component Control [042-002] (Main Drive Motor). Does the Main Drive Motor rotate? Y↓ N→Turn the power Off and remove the Rear Upper Cover. Turn the power On. Is the voltage between the MD PWB P/J535-1 (+) and the GND (-) +24VDC? Y↓ N→Go to +24VDC Power RAP. Is the voltage between the MD PWB P/J525-A16 (+) and the GND (-) +5VDC? Y↓ N→Go to +5VDC Power RAP. Turn the power Off and check the connections between the MD PWB P/J535 and the Main Drive Motor P/J244, as well as between the MD PWB P/J525 and the Main Drive Motor P/J245 for open circuits, short circuits, and poor contacts. If no problems are found, replace the following parts in sequence: • Main Drive Motor • MD PWB • MCU PWB Press the Stop button and turn the power Off. Install the IBT Unit and close the L/H Cover. Turn the power On and enter Service Diagnostics (Entering Service Diagnostics). Turn On dc330 Component Control [042-002] (Main Drive Motor). Does the Main Drive Motor rotate? Y↓ N→Check the 2nd BTR for loading and the Drive Gear for revolution failure or damage Press the Stop button. Turn On dc330 Component Control [042-002] (Main Drive Motor), then turn On dc330 Component Control [077-001] (Takeaway Clutch). Turn On DC330 [042-002] (Main Drive Motor), then turn On DC330 [077-050] (Takeaway Motor). Does the Main Drive Motor rotate? Y↓ N→Press the Stop button. Turn On dc330 Component Control [042-002] (Main Drive Motor), then turn On DC330 [077-002] (Registration Clutch). Does the Main Drive Motor rotate? Y↓ N→Check the Registration Roll for loading and the Drive Gear for revolution failure or damage Press the Stop button and turn the power Off. Check the connection between the Main Drive Motor P/J245-8 and the MD PWB P/J525-A9 for open circuit, short circuit, and poor contact. If no problems are found, replace the following parts in sequence: • MD PWB • MCU PWBCheck the Tray 1 Takeaway Roll and the Tray 1 Takeaway Roll for loading and the Drive Gear for revolution failure or damage

← Xem tất cả mã lỗi Xerox Phaser 7800

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie