Description: LPH Write Fault Y. Communication error between MCU and LPH Unit (Y) (data write error to LPH).
Remedy: Procedure Refer to dc131 NVM Read/Write [749-046] (Write Retry Data Y). Is the value of dc131 NVM Read/Write [749-046] (Write Retry Data Y) "0"? Y↓ N→Check the following: • The Flat Cable between the MCU PWB P/J557 and the LPH Rear PWB (Y) P/J561 for open circuits, short circuits, and poor contacts • The Flat Cable between the LPH H PWB (Y) P/J569 and the LPH (Y) P/J577 for open circuits, short circuits, and poor contacts (connection within the LPH Unit) • The connector P/J581 between the LPH Rear PWB (Y) and the LPH H PWB (Y) for damage and foreign substances • The LPH Unit (Y) for improper installation • The Drum/Dev Drive Motor (Y, M, C) for improper installation (affected by the noises caused by improper installation) • The NVM value for corruption If no problems are found, replace the following parts in sequence: • LPH Unit (Y) • LPH Cable Assembly • LPH Rear PWB (Y) • MCU PWB Check the following: • The connection between the MD PWB P/J532 and the LPH Rear PWB (Y) P/J553 for open circuit, short circuit, and poor contact • The connection between the LPH H PWB (Y) P/J565 and the LPH (Y) P/J573 for open circuit, short circuit, and poor contact (connection within the LPH Unit) • The connector P/J581 between the LPH Rear PWB (Y) and the LPH H PWB (Y) for damage and foreign substances • The LPH Unit (Y) for improper installation If no problems are found, replace the following parts in sequence: • LPH Unit (Y) • LPH Cable Assembly • LPH Rear PWB (Y) • MD PWB • MCU PWB