Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 361.367 — Xerox Phaser 7800

Code: 361.367

Description: LPH Write Fault M. Communication error between MCU and LPH Unit (M) (data write error to LPH).
Remedy: Refer to dc131 NVM Read/Write [749-047] (Write Retry Data M). Is the value of dc131 NVM Read/Write [749-047] (Write Retry Data M) "0"? Y↓ N→Check the following: • The Flat Cable between the MCU PWB P/J556 and the LPH Rear PWB (M) P/J560 for open circuits, short circuits, and poor contacts • The Flat Cable between the LPH H PWB (M) P/J568 and the LPH (M) P/J576 for open circuits, short circuits, and poor contacts (connection within the LPH Unit) • The connector P/J580 between the LPH Rear PWB (M) and the LPH H PWB (M) for damage and foreign substances • The LPH Unit (M) for improper installation • The Drum/Dev Drive Motor (Y, M, C) for improper installation (affected by the noises caused by improper installation) • The NVM value for corruption If no problems are found, replace the following parts in sequence: • LPH Unit (M) • LPH Cable Assembly • LPH Rear PWB (M) • MCU PWB Check the following: • The connection between the MD PWB P/J532 and the LPH Rear PWB (M) P/J552 for open circuit, short circuit, and poor contact • The connection between the LPH H PWB (M) P/J564 and the LPH (M) P/J572 for open circuit, short circuit, and poor contact (connection within the LPH Unit) • The connector P/J580 between the LPH Rear PWB (M) and the LPH H PWB (M) for damage and foreign substances • The LPH Unit (M) for improper installation If no problems are found, replace the following parts in sequence: • LPH Unit (M) • LPH Cable Assembly • LPH Rear PWB (M) • MD PWB • MCU PWB

← Xem tất cả mã lỗi Xerox Phaser 7800

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie