Description: LPH Write Fault K. Communication error between MCU and LPH Unit (K) (data write error to LPH).
Remedy: Refer to dc131 NVM Read/Write [749-049] (Write Retry Data K). Is the value of dc131 NVM Read/Write [749-049] (Write Retry Data K) "0"? Y↓ N→Check the following: • The Flat Cable between the MCU PWB P/J554 and the LPH Rear PWB (K) P/J558 for open circuits, short circuits, and poor contacts • The Flat Cable between the LPH H PWB (K) P/J566 and the LPH (K) P/J574 for open circuits, short circuits, and poor contacts (connection within the LPH Unit) • The connector P/J578 between the LPH Rear PWB (K) and the LPH H PWB (K) for damage and foreign substances • The LPH Unit (K) for improper installation • The Drum/Dev Drive Motor (Y, M, C) for improper installation (affected by the noises caused by improper installation) • The NVM value for corruption If no problems are found, replace the following parts in sequence: • LPH Unit (K) • LPH Cable Assembly • LPH Rear PWB (K) • MCU PWB Check the following: • The connection between the MD PWB P/J532 and the LPH Rear PWB (K) P/J550 for open circuit, short circuit, and poor contact • The connection between the LPH H PWB (K) P/J562 and the LPH (K) P/J570 for open circuit, short circuit, and poor contact (connection within the LPH Unit) • The connector P/J578 between the LPH Rear PWB (K) and the LPH H PWB (K) for damage and foreign substances • The LPH Unit (K) for improper installation If no problems are found, replace the following parts in sequence: • LPH Unit (K) • LPH Cable Assembly • LPH Rear PWB (K) • MD PWB • MCU PWB