Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 361.610 — Xerox Phaser 7800

Code: 361.610

Description: Bitz1 CONTIF Fault. An irregularity was detected in the Valid signal for Y or M color. The Valid signal, which is sent from the Controller to indicate the valid range of the fast scan, does not turn On at the given timing or turns On at an unscheduled timing. (This is a hidden failure. Data is only recorded in history.)
Remedy: 1. Turn the power Off and On. 2. Check whether there is poor connection or foreign substances at the following connectors. • Between BP PWB and MCU PWB P/J451 • Between BP PWB J335 and I/P PWB P335 • Between BP PWB J309 and I/P PWB P309 If no problems are found, replace the following parts in sequence: • BP PWB • MCU PWB

← Xem tất cả mã lỗi Xerox Phaser 7800

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie