Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 373.900 — Xerox Phaser 7800

Code: 373.900

Description: Tray 4 Feed Out Sensor Static Jam. When the power was turned On, the M/C was stopped (Cycle Down/ Shut Down), or when the interlocks were closed (all interlocks including options), the Tray 4 Feed Out Sensor detected paper.
Remedy: Check the following: • The Tray 4 Feed Out Sensor for remaining paper, contamination, Actuator return failure, or improper installation • The Tray 4 Feed Out Sensor for failure: dc330 Component Control [073-103] (PL 10.12) • The connection between the Tray 4 Feed Out Sensor P/J112-2 and the Tray Module PWB P/J548-11 for short circuit • The connection between the MD PWB J592-A7 and the Tray Module PWB P/J541-7 for short circuit If no problems are found, replace the following parts in sequence: • Tray Module PWB (PL 10.9) • MD PWB • MCU PWB

← Xem tất cả mã lỗi Xerox Phaser 7800

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie