Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 375.135 — Xerox Phaser 7800

Code: 375.135

Description: Reg Sensor On Jam (Tray 1). The Reg Sensor does not turn On within the specified time after the Reg Clutch On after the Feed from the Tray 1 has started.
Remedy: Check the following: • A paper transportation failure due to a foreign substance/burr on the paper path • The Tray 1 Takeaway Roll and Pinch Roll for contamination, wear, and revolution failure • The Tray 1 Takeaway Roll Drive Gear for wear and damage • Use of paper out of spec (Refer to the spec in Chapter 6 General) • The Reg Sensor for contamination, improper installation, and Actuator operation failure • The Reg Sensor for failure: dc330 Component Control [077-103] (PL 15.2) • The connection between the Reg Sensor P/J160 and the MD PWB P/J523 for open circuit, short circuit, and poor contact • The Main Drive Motor for revolution failure: DC330 [042-002] (PL 3.2) • The Takeaway Motor for revolution failure: DC330 [077-050] (PL 15.1) If no problems are found, replace the following parts in sequence: • MD PWB • MCU PWB

← Xem tất cả mã lỗi Xerox Phaser 7800

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie